Measurement is an important link in the installation and construction of aluminum veneers

During the installation process of aluminum veneer,Measurement is a very important process。Only when the measurement process is done accurately and accurately enough,Only then can the subsequent stages proceed smoothly。otherwise,During the installation process of aluminum veneer, there may be issues with installation failure,Or the overall decorative effect may not meet the expected requirements。in short,The quality of installation largely depends on the preparation of a solid foundation of data measurement。

Throughout the entire measurement process,It is necessary to conduct retesting based on relevant data such as axis and elevation provided by the civil engineering party。During the measurement process,Not only do we need to measure the height,We also need to measure the overall contour lines and other data of the building,Then compare the measured data with the data provided by the design institute,If the error is too large,We still need to provide suggestions for renovation。

In conducting this data measurement,Professional personnel and equipment are required,This is an important prerequisite for ensuring data accuracy。in addition,The measurement data error must be controlled within a sufficiently small range,Because the errors in the measurement data are gradually accumulated,Even if a data error is very small,The subsequent impact will also be very significant,Only in this stage can we do a good job,Setting out、Install embedded parts and evenAluminum veneerThe next series of installation steps can proceed smoothly。